powered by Motorsport.com
  • 06.09.2020 · 10:47

rFactor 2: Build 1121 zur Rennsimulation mit vielen Überarbeitungen

Studio 397 hat für rFactor 2 nach längerer Zeit eine neue Version veröffentlicht mit der den Simracern einiges an Verbesserungen geboten wird, zusätzlich wurden kurz zuvor bei den GTE-Fahrzeugen einige Optimierungen vorgenommen

(MST/Speedmaniacs.de) - Das letzte große Update von rFactor 2 liegt schon einige Monate zurück. Höchste Zeit für Studio 397 das zu ändern. Mit dem am Freitag veröffentlichten Build 1121 steht Simracern passend zum Wochenende nun eine Version zur Verfügung welche "eine ganze Reihe an Fehlern" beseitigt und viele "Verbesserungen im Programmcode" enthält.

rFactor 2

Für rF2-Besitzer ist seit Freitag ein neues Build der Rennsimulation verfügbar Zoom

Wie der unten stehenden Übersicht zu entnehmen ist, haben die Entwickler von der Benutzeroberfläche über die Bereiche Modding-Support, Grafik, Multiplayer und Broadcast-Overlays so einiges an Überarbeitungen zu einer neuen Version zusammengestellt. Darin enthalten sind auch neue Controller-Profile für eine Reihe an Eingabegeräten.

Enthalten sind ferner Überarbeitungen am Code für die Langstreckenrennevents, Plugins für die im Juli veröffentlichten Stockcars, eine neue Modding-Dokumentation für die PBR-Shader, als Beispiel zum Lernen die Dev-Modus-Version von Loch Drummond sowie der Material-Editor für eigene Fahrzeugdesigns mit dem das Feintuning der Materialien vereinfacht wird.

Einen Tag vor dem Build 1121 wurden zudem von Studio 397 unter "balance of performance" stehende Anpassungen bei den GTE-Rennwagen freigegeben. Chevrolet Corvette C7.R GTE, Aston Martin Vantage GTE, BMW M8 GTE, Porsche 991 RSR GTE und Ferrari 488 GTE haben dabei einiges an Feintuning erhalten.

GTE BOP September 2020-Changelog:
Chevrolet Corvette C7.R GTE
v2.47
-Fix for wrong default differential preload
-New default Set-up
-Qualification fuel map as new default.

Aston Martin Vantage GTE
v1.57
-Added +5kg weight penalty
-New default Set-up
-Approximately 1% more fuel consumption.
-Qualification fuel map as new default
-Approximately 0.6% less engine torque and power output.
-Corrections to damper travel in both directions (mainly on rebound, but also very minor to bump stops).
-Fix for camber adjustment step (now it's 0.1 deg) Note: this change will require corrections for camber angles in existing Set-ups.
-Increased drag by Approximately 3.7% and reduced downforce by Approximately 2.8%.

BMW M8 GTE
v2.07
-New default Set-up
-Qualification fuel map as new default
-Approximately 3.2% less downforce

Porsche 991 RSR GTE
2.47
-New default Set-up
-Approximately 1% more fuel consumption.
-Qualification fuel map as new default
-Approximately 0.5% more engine torque and power and 2.3% less downforce

Ferrari 488 GTE
v1.67
-New default Set-up
-Fixed fuel tank (was 93L, should be 90L)
-Qualification fuel map as new default
-Approximately 2.3% less fuel consumption
-Approximately 0.55% less engine torque and power output

rFactor 2 - Build 1121-Changelog:
User Interface
-Added key binding for hide cursor. This is useful when running the in-game overlays and doing a broadcast to a capture card that insists on showing your cursor otherwise.
-All replay controls can now be custom assigned in the controller tab. By default all replay controls are mapped to the same defaults unless re-assigned.
-Added first time start up wizard. For now only has name and nickname fields. This will be extended.
-Added player area in the main UI. For now only has name and nickname fields.
-In showroom we now check for upgrades on page load and do not show info if there aren't any.
-Disabled select button in list layout for category items. When switching from grid or thumbnail layout to the list layout, and having a "category" item selected, the select button would be available and would glitch things when clicked.
-Clear car configuration info when viewing a "category" item.
-Updated the pop-up layout and styling.
-Renamed event screen "Drive" button to "Passenger" when in multiplayer spectator mode.

-Made transitioning to packages area page smoother:
--Get packages after the page has loaded to avoid blocking.
--Show a pop-up message while getting packages.
--Use a dark grey background during switching to the page.

-Enabled a chat message for single player admin commands.
-Fixed a game crash when switching sessions.
-Fix accessing garage data properties if data is not available.
-All controller profiles are updated. This fixes various issues when using 'Detect' on first time hardware Set-up.

-We have new controller profiles for:
--Simucube 2 Sport;
--Simucube 2 Pro;
--Simucube 2 Ultimate;
--Logitech G923 PlayStation 4 and PC;
--Logitech G923 XBox One and PC;
--VRS OSW;
--XBOX One Controller For Windows.

-Added "PlayerFileOverrides" to various profiles to ensure proper driver aids are enabled/disabled on first time wheel detect.
-Added use thread "true" for all profiles.
-Ensured that the "920 workaround" is set to "false" on all non-Logitech profiles.
-Fixed profile naming and removed redundant profiles.
-Fixed stuck 'look left' on TS-XW profile.
-Thrustmaster F1 wheel Integral profiles: Fixed all mapping conflicts: T-GT, TS-PC, T500 RS, TS-XW.
-Thrustmaster Racing wheel profiles: Fixed all mapping conflicts: T-GT, TS-PC, T500 RS.
-Thrustmaster F1 wheel Integral profiles: Fixed all mapping conflicts: T-GT, TS-PC, T500 RS, TS-XW.
-Thrustmaster Racing wheel profiles: Fixed all mapping conflicts: T-GT, TS-PC, T500 RS.
-Added correct max torque to Fanatec CSW v1, v2, V2.5 and Direct Drive profiles.

Modding Support
-Published a ton of new information about modding for rFactor 2 on the documentation website.
-Large update to modding documentation, will full documentation on PBR material system, dedicated Development Tools section and more.
-First official release of 3ds Max 2021 Plugins.
-First official release of Material Editor.
-First official release of Maps Converter Tool.
-Added Loch Drummond (PBR Track) to ModDev.
-Added ability to disable auto albedo correction on pre PBR shaders.
-Added ability to choose cube Fresnel default settings on pre PBR car body shader.
-Corrected Deformable Tire shader naming in Max Plugins.
-Exposed Atmospherics section in Wet file to configure Haze and other settings..
-Updated ModDev to use main game HUD.
-Added ability to save preset positions in the Scene Viewer.

Graphics
-Added new pit exit marshal textures, thanks to Alessandro Micali!
-Small refactor of glare settings in PostFX
-Many other minor tweaks to various shaders and settings.

Multiplayer
-Significantly improved logging for multiplayer sessions.
-Fixed race conditions in our low level socket node list.
-Increased the size of an internal array to accommodate all possible cars in a session.
-Fixed an issue where not just the server would send out node reordering messages.
-Changed some very "spammy" log messages.
-Fixed several crashes where some code would reference invalid data.
-Added descriptive names to all threads.
-Improved the handling of an application crash to ensure logs get flushed.

Broadcast Overlays
-Made qualifying box sector colors correspond to best lap sectors instead of absolute best sectors.
-Added fallback for drivers with no last name set.
-Added drop-down in control panel to select overlay configuration.
-Made replay transition follow the configured series color.
-Added an option to show more data in tower field 4 (gap to next, number of pit stops).
-Added an option to automatically enable race update box when timing box is enabled.
-Fixed pit timer getting stuck after leaving pit lane.
-Fixed displaying of gaps to leader/fastest lap time in tower and banner.
-Extended field 2 data with manufacturer and team logo.
-Added turning lap time green or purple in the qualifying box after the lap.
-Added option to minimize boxes in the control panel.
-Fixed starting order not working with multiple events.
-Fixed replay jumping to wrong time.
-Cleaned up the CSS to make it easier to make changes in the custom.css.
-Added a replay marker button to mark replay events.
-Updated team name and car number to use the entries from the .VEH file.
-Added mixed/overall standings option.
-Added an option to toggle between driver name, team name and description.
-Made b-roll a standalone element.
-Added option to condense tower by hiding field 2 or 3.
-Fixed schedule slide date comparing.
-Added an option to start the overlay in multi-class or single-class mode.
-Updated banner behavior based on the selected car class (or mixed/multi-class mode).
-Rearranged control panel.
-Known issue: tower animation flickers when swapping pages.

Neueste Kommentare

Noch kein Kommentar vorhanden!
Erstellen Sie jetzt den ersten Kommentar

Motorsport-Total.com auf Facebook

Werde jetzt Teil der großen Community von Motorsport-Total.com auf Facebook, diskutiere mit tausenden Fans über den Motorsport und bleibe auf dem Laufenden!

Motorsport-Total.com auf Twitter

Motorsport-Total Business Club

Motorsport-Total.com auf Instagram

Folge uns jetzt auf Instagram und erlebe die schönsten und emotionalsten Momente im Motorsport zusammen mit anderen Fans aus der ganzen Welt

Anzeige

Games-Newsletter

Abonnieren Sie jetzt den kostenlosen täglichen und/oder wöchentlichen Games-Newsletter von Motorsport-Total.com!